topic Re: Supported configuration ? in HPE Primera Storage

Supported configuration ?

LarsAL — Mon, 04 Jul 2022 11:50:01 GMT

Is this a supported configuration for at new system beeing installed?

C650 withe N0 + N1 installed (N2 and N3 empty)
N0/N1 = 8 x 7,68 TB NVMe
E2 = 6 x 7,68 TB SSD
E3 = 6 x 7,68 TB SSD
E4 = 4 x 7,68 TB SSD

/Lars

Re: Supported configuration ?

techin — Mon, 04 Jul 2022 04:58:06 GMT

@LarsAL

Which product are you referring to? Is it for a laptop?

Re: Supported configuration ?

sbhat09 — Mon, 04 Jul 2022 05:05:39 GMT

Hello @LarsAL,

Yes. That is a perfectly supported configuration unless you are using HA-cage for all the drives. Good to go.

@techin - This is about the HPE Primera system. Where N=Node, E=Enclosures.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.

Re: Supported configuration ?

rachelgomez_123 — Fri, 08 Jul 2022 06:02:51 GMT

A supported configuration is defined by a JVM and its supported environments (operating systems, hardware architectures, etc.) as defined by the JVM vendor. Tested configurations are a Red Hat tested subset of the full set of supported configurations.

Regards,

Rachel Gomez