topic Re: SDN Remote debugging from Eclipse is not working on V 2.0 in Software Defined Networking

SDN Remote debugging from Eclipse is not working on V 2.0

Melcayas — Thu, 05 Dec 2013 00:38:04 GMT

Good Day to everyone

As soon as i create a new remote debug session and use the port 8000, the controller rejects my connection:

'Launching MySDNcontroller' has encountered a problem.

Failed to connect to remote VM

com.sun.jdi.connect.spi.ClosedConnectionExeption

Is it the port blocked by the SDN controler somehow?

Re: SDN Remote debugging from Eclipse is not working on V 2.0

sepbot — Thu, 05 Dec 2013 01:12:53 GMT

Try this: Open the file /opt/sdn/virgo/bin/dmk.sh and change the line that reads "DEBUG_FLAG=" to "DEBUG_FLAG=1". Save the file and restart the controller service.

Re: SDN Remote debugging from Eclipse is not working on V 2.0

sdnindia — Wed, 05 Feb 2014 06:01:31 GMT

Hi,

Please follow steps below.

1. add /opt/sdn/virgo/options file ( if it is there, just edit)

2. Add the following line.

3. export VIRGO_OPTS=”-debug 8787”

4. In Eclipse, navigate to Run | Debug.

5. Select Remote Java Application , on the left column. Click New.

6. Provide the IP of the HP SDN Controller and port 8787.

7. Click Apply.

'Please let us know if this answers your question by marking this response as an 'accepted solution’ or if it has been helpful click on the purple star to the left to give me kudos'.

HP SDN Team