topic Re: OFPFMFC_EPERM error message in Software Defined Networking

OFPFMFC_EPERM error message

OzgurKarakaya — Wed, 25 Dec 2013 11:34:00 GMT

For Hp 3500 yl(J8693A) switch with K.15.14.00 using Of 1.3 version(attachment switch_of_config.png ), when I send a flow mod message from the controller as shown in the attachment flow_mod.jpg, I receive the "OFPFMFC_EPERM" error message.

I tried many versions of this flow mod by changing table id, priority, out group, outport, inport, buffer id and instructions. But still receiving this error.

Re: OFPFMFC_EPERM error message

OzgurKarakaya — Thu, 26 Dec 2013 09:06:23 GMT

Problem Solved, in the flow mod message after seting table_id -> 100, it works.

Table 0 is a read_only table.

Re: OFPFMFC_EPERM error message

Sukar — Thu, 30 Jan 2014 12:16:23 GMT

Hello,

We see that the problem is solved. Please do let us know if you need any further assistance regarding this query. Please reply incase you have more questions around the same topic or open a new thread if new topic.

If you feel this isuses is resolved, please do let us know by marking response as an 'accepted solution’.

Thanks

Sukar

HP SDN Team