How to use "SET_QUEUE"

armandom — Wed, 12 Feb 2014 01:50:30 GMT

Anyone have an example of how can I create a flow with the action "SET_QUEUE" and see the queue counters.

I use RSdoc and switches 3800 version 15.14.003 OpenFlow version 1.3

thank you

Re: How to use "SET_QUEUE"

Gerhard Roets — Thu, 13 Feb 2014 00:28:57 GMT

Hi Armandom

SET_QUEUE is not supported on the 3800 platform.

This is documented in the "HP Switch Software OpenFlow Administrator’s Guide for K/KA/WB 15.14" which is on the HP web site.

Search for "Unsupported features:" in the document or you can look for the "Supported RFCs and standards" section in Chapter 1 Introduction.

Hope this helps

Gerhard