topic can't see the flows generated by the Path Daemon in Software Defined Networking

can't see the flows generated by the Path Daemon

armandom — Thu, 03 Apr 2014 04:33:03 GMT

I'm using HP VAN SDN Controller 2.2 and I always see the flows shown in Figure 1 , but in HP VAN SDN Controller 2.0 I saw the flows generated by the Path Daemon when traffic is generated between two or more host

maybe I have to change some settings?

Thanks for your help

Re: can't see the flows generated by the Path Daemon

sdnindia — Wed, 30 Apr 2014 15:24:29 GMT

Hello armandom,

Could you please check the settings for com.hp.sdn.ctl.path.impl.PathDaemon in Configuration at https://Controller_IP:8443/sdn/ui/app/index#configs , idle.timeout should not be a very less value.

Thanks,

HP SDN Team

Re: can't see the flows generated by the Path Daemon

Tomas_Kubica — Thu, 01 May 2014 12:58:12 GMT

New version version defaults to hybrid mode, check it out. Last resort is forward normal then, rather than forward to controller so Path Daemon is not notified. You can change mode in controller configuration GUI.

Cheers,

Tomas

Re: can't see the flows generated by the Path Daemon

sdnindia — Fri, 09 May 2014 09:40:21 GMT

Hello armandom,

Doing a follow up to check if you need any further assistance with respect to the query posted.

Please do let us know if your problem is solved.

If you have more questions on the same topic please do reply on the same thread or open a new post if new topic.

Thanks

HP SDN Team