topic Re: Create http get packet , and send it to switch in Software Defined Networking

Create http get packet , and send it to switch

vmoki — Thu, 24 Jul 2014 14:04:03 GMT

Hello

I would like create an http get packet (if it is possible ), send it from controller to switch .

Please send an example how can i do it .

Thanks.

Re: Create http get packet , and send it to switch

sdnindia — Wed, 20 Aug 2014 10:00:36 GMT

Hello vmoki,

Apologies for the delay.
The controller framework (packet library of hp-utils) does not support to create the http packet, however we would like to know the use case to see if there is a means on how the same can be achieved.

Thanks,
HP SDN Team

Re: Create http get packet , and send it to switch

vmoki — Wed, 20 Aug 2014 11:58:37 GMT

Health check purposes of the application
Controller will send 2 health check packet , the packets will go through content filtering device .
The packet with normal content will pass normaly and will be forwarded back to controller.
The packet with bad content will pass normaly and will be discarded .

In case controller wont recieve any packet back to controller , the controller should bypass the CF device .

Re: Create http get packet , and send it to switch

vmoki — Wed, 20 Aug 2014 11:59:24 GMT