VAN SDN 2.5.15 INSTALL

Eli182 — Fri, 14 Aug 2015 21:01:41 GMT

Good Morning:
I am a student of electrical engineering and am currently studying on the SDN, I had problems with the driver installation:
From the Ubuntu operating system in the terminal window I perform the following steps:
1- Release the zip file
2-Change the terminal window to the location of the zip file
3- unzip hp-van-sdn-ctlr-2.5.15-x64.zip
5- sudo dpkg --unpack hp-sdn-ctl_2.5.15.1175_amd64.deb
5- sudo apt-get install -f
6-sudo / opt / SDN / admin / config_local_keystone
7- start sudo service SDNC
8-sudo service status SDNC
SDNC start / running, process 930
9- netstat -an | grep 8443
tcp6 0 0 ::: 8443 :::
10- ifconfig
11- https: //x.x.x.x: 8443 / SDN / ui /

Username: SDN
Password: skyline

But I failed to display the work

Re: VAN SDN 2.5.15 INSTALL

Carlos — Mon, 17 Aug 2015 14:06:29 GMT

Eli,

Would you provide us with more information about your issue:

1. screenshot of the problem you are experiencing.

2. logs of the controller

3. have you tried to uninstall and install the controller

4. Brownser name and version

5. Ubuntu Release version. Make sure you are running 12.04

But just based on the information you provided it seems you are using the wrong version of Ubuntu.

Best Regards,

Carlos

Re: VAN SDN 2.5.15 INSTALL

ph4ntom74 — Mon, 01 Feb 2016 21:22:04 GMT

I'm having a similar problem and need some help with this please.

system Running:

SDNController:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 12.04.5 LTS
Release: 12.04
Codename: precise

after installing the controller, i couldn't login via web service because of an certificate error (tried it with Chrome and Firefox):

"hp van sdn controller ERR_SSL_VERSION_OR_CIPHER_MISMATCH"

and after correcting it, and as shown below the installation went ok, i still cant login. I dont even see the port 8443 open

SDNController:~$ sudo dpkg -l hp-sdn-ctl
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Description
+++-===================-===================-======================================================
ii hp-sdn-ctl 2.4.5.0614 HP VAN SDN Controller

SDNController:~$ netstat -an | grep 8443

SDNController:~$ sudo netstat -ntplu
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 707/sshd
tcp 0 0 127.0.0.1:7000 0.0.0.0:* LISTEN 1413/java
tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN 899/postgres
tcp 0 0 127.0.0.1:7001 0.0.0.0:* LISTEN 1413/java
tcp 0 0 0.0.0.0:35357 0.0.0.0:* LISTEN 842/python
tcp 0 0 0.0.0.0:7199 0.0.0.0:* LISTEN 1413/java
tcp 0 0 0.0.0.0:56740 0.0.0.0:* LISTEN 1413/java
tcp 0 0 0.0.0.0:9160 0.0.0.0:* LISTEN 1413/java
tcp 0 0 0.0.0.0:49704 0.0.0.0:* LISTEN 1413/java
tcp 0 0 0.0.0.0:5000 0.0.0.0:* LISTEN 842/python
tcp6 0 0 127.0.0.1:8080 :::* LISTEN 1200/java
tcp6 0 0 :::8081 :::* LISTEN 858/java
tcp6 0 0 :::22 :::* LISTEN 707/sshd
tcp6 0 0 :::51223 :::* LISTEN 1200/java
tcp6 0 0 :::5700 :::* LISTEN 1200/java
tcp6 0 0 :::6633 :::* LISTEN 1200/java
tcp6 0 0 :::8009 :::* LISTEN 1200/java
tcp6 0 0 :::6634 :::* LISTEN 1200/java
udp 0 0 0.0.0.0:68 0.0.0.0:* 674/dhclient3
udp 0 0 192.168.192.42:123 0.0.0.0:* 1115/ntpd
udp 0 0 127.0.0.1:123 0.0.0.0:* 1115/ntpd
udp 0 0 0.0.0.0:123 0.0.0.0:* 1115/ntpd
udp6 0 0 ::1:123 :::* 1115/ntpd
udp6 0 0 fe80::a00:27ff:fea4:123 :::* 1115/ntpd
udp6 0 0 :::123 :::* 1115/ntpd
SDNController:~$

Now after trying to https://xxxxxxxxxx:8443/sdn/ui/ I get:
"ERR_CONNECTION_REFUSED"

This is what i see in stdout log:

SDNController:~$ sudo less /var/log/sdn/admin/stdout.log
uid=108(sdnadmin) gid=115(sdn) groups=115(sdn)
Feb 01, 2016 8:22:25 PM org.glassfish.grizzly.http.server.NetworkListener start
INFO: Started listener bound to [0.0.0.0:8081]
Feb 01, 2016 8:22:26 PM org.glassfish.grizzly.http.server.HttpServer start
INFO: [HttpServer] Started.
Feb 01, 2016 8:22:26 PM org.glassfish.grizzly.servlet.WebappContext deploy
INFO: Starting application [context] ...
Feb 01, 2016 8:22:26 PM org.glassfish.grizzly.servlet.WebappContext initServlets
INFO: [context] Servlet [com.sun.jersey.spi.container.servlet.ServletContainer] registered for url pattern(s) [[/*]].
Feb 01, 2016 8:22:26 PM org.glassfish.grizzly.servlet.WebappContext deploy
INFO: Application [context] is ready to service requests. Root: [].

=====

i find it a bit confusing to check the logs and problems that come along the installation, here is another output, to be honest im not sure i understand the binding (por 9160), as i didnt read the controller architecture.

SDNController:~$ sudo tail -10 /var/log/sdn/cassandra/system.log
INFO [CompactionExecutor:1] 2016-02-01 20:24:20,324 CompactionTask.java (line 105) Compacting [SSTableReader(path='/opt/sdn/cassandra/data/system/local/system-local-ib-12-Data.db'), SSTableReader(path='/opt/sdn/cassandra/data/system/local/system-local-ib-10-Data.db'), SSTableReader(path='/opt/sdn/cassandra/data/system/local/system-local-ib-13-Data.db'), SSTableReader(path='/opt/sdn/cassandra/data/system/local/system-local-ib-11-Data.db')]
INFO [FlushWriter:1] 2016-02-01 20:24:20,406 Memtable.java (line 487) Completed flushing /opt/sdn/cassandra/data/system/local/system-local-ib-14-Data.db (129 bytes) for commitlog position ReplayPosition(segmentId=1454354652957, position=50853)
INFO [CompactionExecutor:1] 2016-02-01 20:24:20,535 CompactionTask.java (line 262) Compacted 4 sstables to [/opt/sdn/cassandra/data/system/local/system-local-ib-15,]. 987 bytes to 520 (~52% of original) in 197ms = 0.002517MB/s. 4 total rows, 1 unique. Row merge counts were {1:0, 2:0, 3:0, 4:1, }
INFO [main] 2016-02-01 20:24:20,537 StorageService.java (line 1324) Node /127.0.0.1 state jump to normal
INFO [main] 2016-02-01 20:24:20,556 StorageService.java (line 778) Startup completed! Now serving reads.
INFO [main] 2016-02-01 20:24:20,677 CassandraDaemon.java (line 371) Not starting native transport as requested. Use JMX (StorageService->startNativeTransport()) or nodetool (enablebinary) to start it
INFO [main] 2016-02-01 20:24:20,725 ThriftServer.java (line 90) Binding thrift service to /0.0.0.0:9160
INFO [main] 2016-02-01 20:24:20,858 ThriftServer.java (line 102) Using TFramedTransport with a max frame size of 15728640 bytes.
INFO [main] 2016-02-01 20:24:20,974 TServerCustomFactory.java (line 47) Using synchronous/threadpool thrift server on 0.0.0.0 : 9160
INFO [Thread-2] 2016-02-01 20:24:20,975 ThriftServer.java (line 110) Listening for thrift clients...

Can you gusy help me out with this please? I have a presentation to make on wednesday and in that presentation i would like to show a brief operation of HP controller.

Aould appreciate someone help me put this running. Another thing, should I install mininet and vswitch on the controller or should i install those in a separate machine? Im tryingin this out in GNS3.

Thank you

topic VAN SDN 2.5.15 INSTALL in Software Defined Networking

VAN SDN 2.5.15 INSTALL

Re: VAN SDN 2.5.15 INSTALL

Re: VAN SDN 2.5.15 INSTALL