https://community.hpe.com/t5/software-defined-networking/interval-in-which-the-controller-reads-the-network-state/m-p/6841293#M1815 <P>To get the network state, the HP controller sends OpenFlow read-state messages to all switches in order to receive, e.g., the list of flow rules which are installed on a switch.</P><P>My question is: in what interval is the HP controller doing this?</P><P>Thanks!</P> Mon, 14 Mar 2016 12:36:32 GMT HansChristian 2016-03-14T12:36:32Z https://community.hpe.com/t5/software-defined-networking/interval-in-which-the-controller-reads-the-network-state/m-p/6841293#M1815 <P>To get the network state, the HP controller sends OpenFlow read-state messages to all switches in order to receive, e.g., the list of flow rules which are installed on a switch.</P><P>My question is: in what interval is the HP controller doing this?</P><P>Thanks!</P> Mon, 14 Mar 2016 12:36:32 GMT https://community.hpe.com/t5/software-defined-networking/interval-in-which-the-controller-reads-the-network-state/m-p/6841293#M1815 HansChristian 2016-03-14T12:36:32Z