topic Re: Error message appear when trying register the ProCurve 2920 to the VAN controller in Software Defined Networking

Error message appear when trying register the ProCurve 2920 to the VAN controller

EddieLi — Wed, 28 May 2014 09:23:34 GMT

Hi, Guys:

Just wondering if you saw this message in the SDN VAN controller before? It appears when I connects the ProCurve 2920 to the SDN controller.

Teaming not configured on this system.

However I did not configure any teaming on the switch yet.

Thanks.

Re: Error message appear when trying register the ProCurve 2920 to the VAN controller

ScottReeve — Wed, 28 May 2014 11:18:42 GMT

Eddie,

Can you have them obtain the following:

1) debug logging on the procurve switch

2) wireshark trace (of the communication between the switch and the controller) This can be run on the controller.

Debugging on the switch:

debug destination session

debug openflow errors

debug openflow events

debug openflow packets

Scott

Re: Error message appear when trying register the ProCurve 2920 to the VAN controller

sdnindia — Wed, 11 Jun 2014 10:24:48 GMT

Hello EddieLi,

Doing a follow up to check if you get any chance to get relevant information as Scott had asked for.
If yes please do help us with the information requested in the earlier post from Scott to take this further.

Please also let us know if you have already resolved the issue.

Thanks
HP SDN Team