OpenFlow 1.0 Set Field Transport Src/Dst

Dast — Fri, 15 Aug 2014 13:37:13 GMT

Hello everyone,

according to the OpenFlow 1.0 specification, it is only possible to set the transport source/destination, but not

specifcally the UDP and TCP ports with an action.

As the SDN controller does not contain a specific set_field operation for this general purpose, I used TCP_SRC and TCP_DST (btw: the usage of UDP_SRC and UDP_DST caused a verision mismatch error).

Now I am wondering whether an action with set_field:tcp_dst=80 also sets the destination value of a UDP packet that fits the match. Does anyone know this?

Best regards!

Re: OpenFlow 1.0 Set Field Transport Src/Dst

sdnindia — Tue, 02 Sep 2014 18:18:34 GMT

Hello Dast,

You can see the json schema/models supported at https://Controller_IP:8443/sdn/v2.0/models .Could you please share the below details

1.Controller version used.

2.error logs/screenshots while using UDP_SRC/UDP_DST [As per your post TCP_SRC/TCP_DST working fine].

3.Code or REST API used.

Thanks,

HP SDN Team

topic OpenFlow 1.0 Set Field Transport Src/Dst in Software Defined Networking

OpenFlow 1.0 Set Field Transport Src/Dst

Re: OpenFlow 1.0 Set Field Transport Src/Dst