No GUI once logged in - how do I troubleshoot

RocTec — Fri, 21 Nov 2014 14:02:40 GMT

I have the controller up and running, I have checked the sdnc service status

also have this info

$ netstat -na | grep 35357
tcp 0 0 0.0.0.0:35357 0.0.0.0:* LISTEN

$ netstat -na | grep 8443
tcp6 0 0 :::8443 :::* LISTEN

I can get to the rsdoc on https://<hostIP>:8443/api/

I am runnging Java 7u80

Tried in latest Chrome and Firefox

Max and Windows,

I think this is something wrong with the way have built it although followed the guide a few times.

Re: No GUI once logged in - how do I troubleshoot

piricchio72 — Fri, 21 Nov 2014 15:25:55 GMT

Hello,

I suspect you might have skipped the step in section 2.2.3 of the guide you're following:

1. Edit the /etc/keystone/keystone.conf file with the following line to set UUID as the

provider type:

provider=keystone.token.providers.uuid.Provider

For example, in the Icehouse version of Keystone, you would insert the above command in

the [token] section of the file, as shown in the boldface entry, below:

[token]

# Options defined in keystone

# External auth mechanisms that should add bind information to

# token e.g. kerberos, x509. (list value)

#bind=

# Enforcement policy on tokens presented to keystone with bind

# information. One of disabled, permissive, strict, required

# or a specifically required bind mode e.g. kerberos or x509

# to require binding to that authentication. (string value)

#enforce_token_bind=permissive

# Amount of time a token should remain valid (in seconds).

# (integer value)

#expiration=3600

# Controls the token construction, validation, and revocation

# operations. Core providers are

# "keystone.token.providers.[pki|uuid].Provider". (string

# value)

provider=keystone.token.providers.uuid.Provider

# Keystone Token persistence backend driver. (string value)

#driver=keystone.token.backends.sql.Token

# Toggle for token system cacheing. This has no effect unless

# global caching is enabled. (boolean value)

#caching=true

. . .

1 Adding this line sets

the UUID provider

type.

2. Restart the Keystone server.

Please let me know if the above solves your problem,

Regards,

Antonio

SDN CoE Team

Re: No GUI once logged in - how do I troubleshoot

RocTec — Mon, 24 Nov 2014 15:46:10 GMT

brill that worked

i had put the provider line was in the wrong the place :-)

Thanks

topic Re: No GUI once logged in - how do I troubleshoot in Software Defined Networking

No GUI once logged in - how do I troubleshoot

Re: No GUI once logged in - how do I troubleshoot

Re: No GUI once logged in - how do I troubleshoot