VAN SDN Installation

dassantos — Thu, 16 Apr 2015 12:06:00 GMT

Hi,

I already have an open stack setup (I am using Havana) and now I am planning to install the VAN SDAN controller on one of the VM. The OS is Ubutu 12.04 LTS (64 bit).

The installation guide says I have to install Keystone. I am already running the KeyStone on my host machine. Do I still need to run Keystone on the VM where I plan to run VAN SDN Controller. Can I not configure to point to that machine instead. I hope this is possible. Can someone please point me to some document on how to do this.

I was going thorugh the pre-requisites and I see the following :

- KVM Version 2.4.5–1 and greater

- NTP needs to be installed.

Is there anything else I am missing.

Please let me know

Thanks, Santos

Re: VAN SDN Installation

dassantos — Thu, 16 Apr 2015 12:48:00 GMT

Figured this out in the installation guide: 4.1 Setting the provider type to UUID on the remote Keystone server

Anyway, if someone can share me a document on how to install it on VM and controller the OVS running the host machine would be useful.

Thanks...

topic Re: VAN SDN Installation in Software Defined Networking

VAN SDN Installation

Re: VAN SDN Installation