Some trouble TechM SFS app.

yl332 — Wed, 19 Aug 2015 02:34:21 GMT

I follow the installation step and try to test the TechM SFS app.

I always got the following error message (see attachments) when I start the app. (type " ./sfsapp eth1 eth1 1 1 " in CLI)

It seems that the app didn't get the path message from the controller through REST API.

Is there any config. I miss to setup?

Thanks.

p.s:

I use HP VAN SDN Controller 2.3

topic Some trouble TechM SFS app. in Software Defined Networking