Get missing flow when use postman

wuc623123 — Wed, 27 Apr 2016 11:05:32 GMT

When i use postman

URL :

http://127.0.0.1:8181/restconf/operational/opendaylight-inventory:nodes/node/openflow:726054106310272/table/0/flow/#UF$TABLE*0-2

<table xmlns="urn:opendaylight:flow:inventory">
 <id>0</id>
 <aggregate-flow-statistics xmlns="urn:opendaylight:flow:statistics">
 <packet-count>105</packet-count>
 <flow-count>2</flow-count>
 <byte-count>6300</byte-count>
 </aggregate-flow-statistics>
 <flow>
 <id>#UF$TABLE*0-2</id>
 <match>
 <ethernet-match>
 <ethernet-type>
 <type>35020</type>
 </ethernet-type>
 </ethernet-match>
 </match>
 <table_id>0</table_id>
 <priority>100</priority>
 <cookie>3098476543630901248</cookie>
 <idle-timeout>0</idle-timeout>
 <instructions>
 <instruction>
 <order>0</order>
 <apply-actions>
 <action>
 <order>0</order>
 <output-action>
 <output-node-connector>CONTROLLER</output-node-connector>
 <max-length>65535</max-length>
 </output-action>
 </action>
 </apply-actions>
 </instruction>
 </instructions>
 <flow-statistics xmlns="urn:opendaylight:flow:statistics">
 <packet-count>0</packet-count>
 <duration>
 <nanosecond>448000000</nanosecond>
 <second>5161</second>
 </duration>
 <byte-count>0</byte-count>
 </flow-statistics>
 <hard-timeout>0</hard-timeout>
 </flow>
 <flow-hash-id-map>
 <hash>Match [_ethernetMatch=EthernetMatch [_ethernetType=EthernetType [_type=EtherType [_value=35020], augmentation=[]], augmentation=[]], augmentation=[]]1003098476543630901248</hash>
 <flow-id>#UF$TABLE*0-2</flow-id>
 </flow-hash-id-map>
 <flow-table-statistics xmlns="urn:opendaylight:flow:table:statistics">
 <active-flows>2</active-flows>
 <packets-matched>0</packets-matched>
 <packets-looked-up>11853</packets-looked-up>
 </flow-table-statistics>
</table>

I found the flow id is

<id>#UF$TABLE*0-2</id>

but it not exitst.

so, what is correctly flow-id to use.

topic Get missing flow when use postman in Software Defined Networking

Get missing flow when use postman