U200-A L2TP

Breuk230 — Fri, 04 May 2012 14:09:50 GMT

HI,

Currently working with a U200-A and trying to get L2TP running. I'm not getting an active connection. In the security policy I see the L2TP connection entering the U200 on the untrust zone to local zone. The policies allow the L2TP and I see the session the session table but not getting active.

I configured this according to the documentation. Configured a local user for user access but this didn't help.

I'm using software version 5.20 feature 5128P01. this because also SSL-VPN is needed for this customer.

I'm using Windows 7 but it seems that only IPSec is possible ith this. I also used Vista, XP and iPad but all the same results.

Has anyone worked with L2TP before? If so, can you share how to configure and how to configure Windows?

Thanks in advance.

regards André

Re: U200-A L2TP

Manfri — Thu, 28 Jun 2012 13:15:19 GMT

i use the inode client, that you can obtaining downloading the Inome management center and creating a customized setup

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=4177945&prodTypeId=12883&objectID=c02602433

the config i used was this

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=5061731&prodTypeId=18964&objectID=c03093836

even without the certificate setup...

I had this strange problem though: having a complex ( many private subnet ) i setup a route in the firewall for all the private network versus the private WAN router, and this break the L2TP in a strange way

after connecting IPSEC the l2tp engine send l2tp packet TO THE IP OF THE CLIENT BEFORE THE NAT!!! ( and you will find the packed using wireshark in the TRUST INTERFACE.

disabling this route ( so that all the packet go to the UNTRUST ) the firewall fixed the packet and the L2TP go up...

I ended trying tho force the routing of LT2P packet to the untrusted , reenabling the private network routing and it seem working ( but i'havent feedback from the support ).

If you have a private network that overlap the private network of the client, the L2TP connection, without this trick do not go up!!!

topic Re: U200-A L2TP in Security e-Series

U200-A L2TP

Re: U200-A L2TP