https://community.hpe.com/t5/security-e-series/h3c-s9505-how-to-enable-http-for-web-access/m-p/5737185#M166 <P>Hi,</P><P>I have two H3C s9505 switches where I wanted to enable http in order to access the switches over WEB. I found H3C documents with command "ip http enable". Unfortunately the switch don't allow "http" after the IP command (produce an command error). Do any of you know if on the switch the WEB access can be enabled and how?</P><P>If you need more information let me know, but please be in mind I'm a "DAU" / newbie in Network and especially in H3C</P><P>&nbsp;</P><P>Thanks in advance</P> Tue, 24 Jul 2012 11:44:34 GMT CoffeeNipper 2012-07-24T11:44:34Z https://community.hpe.com/t5/security-e-series/h3c-s9505-how-to-enable-http-for-web-access/m-p/5737185#M166 <P>Hi,</P><P>I have two H3C s9505 switches where I wanted to enable http in order to access the switches over WEB. I found H3C documents with command "ip http enable". Unfortunately the switch don't allow "http" after the IP command (produce an command error). Do any of you know if on the switch the WEB access can be enabled and how?</P><P>If you need more information let me know, but please be in mind I'm a "DAU" / newbie in Network and especially in H3C</P><P>&nbsp;</P><P>Thanks in advance</P> Tue, 24 Jul 2012 11:44:34 GMT https://community.hpe.com/t5/security-e-series/h3c-s9505-how-to-enable-http-for-web-access/m-p/5737185#M166 CoffeeNipper 2012-07-24T11:44:34Z