https://community.hpe.com/t5/security-e-series/nps-config-to-authenticate-cli-web-access-for-hp5820/m-p/5762565#M170 <P>Hi,<BR /><BR />I configured a HP5820 to authenticate access via RADIUS and now i am dropped into the cli at level 0 and i have very few options if i access it from the http. I configured the AV VSA on the NPS hp-privilege-level=0 with vendor id 11 and vendor id 1 but i am still getting very few commands when i login. This isn't a issue in the CLI as i can super 3.</P><P>However other uses prefer to use to configure the switch via the gui.</P><P>Has anyone ever implemented this?</P><P>&nbsp;</P><P>Thanks</P><P>&nbsp;</P><P>Kev</P> Mon, 13 Aug 2012 19:27:39 GMT kevinhobson200 2012-08-13T19:27:39Z https://community.hpe.com/t5/security-e-series/nps-config-to-authenticate-cli-web-access-for-hp5820/m-p/5762565#M170 <P>Hi,<BR /><BR />I configured a HP5820 to authenticate access via RADIUS and now i am dropped into the cli at level 0 and i have very few options if i access it from the http. I configured the AV VSA on the NPS hp-privilege-level=0 with vendor id 11 and vendor id 1 but i am still getting very few commands when i login. This isn't a issue in the CLI as i can super 3.</P><P>However other uses prefer to use to configure the switch via the gui.</P><P>Has anyone ever implemented this?</P><P>&nbsp;</P><P>Thanks</P><P>&nbsp;</P><P>Kev</P> Mon, 13 Aug 2012 19:27:39 GMT https://community.hpe.com/t5/security-e-series/nps-config-to-authenticate-cli-web-access-for-hp5820/m-p/5762565#M170 kevinhobson200 2012-08-13T19:27:39Z