https://community.hpe.com/t5/security-e-series/new-switch/m-p/6922790#M756 <P>If i am getting you right you want to connect another switch that will be in VLAN 64?</P><P>Set the F22 to untagged vlan 64</P><P>&nbsp;</P> Fri, 02 Dec 2016 08:44:28 GMT Skribbla 2016-12-02T08:44:28Z https://community.hpe.com/t5/security-e-series/new-switch/m-p/6922184#M746 <P>I have&nbsp;two&nbsp;existing switches that have their gbic port 23 and 24 trunked together on vlan 64.&nbsp; If i wanted to add another switch from another suite how would I add it to vlan 64 so that it is just an extension of the vlan that is already in place?&nbsp; I have tried adding another gbic to an empty port slot (F22) and tagged it to vlan 64 and I did the same thing on the new switch that I'm trying to get connected so that they are both tagged.&nbsp; Am I going about this the right way or would i need to break the existing trunk?&nbsp; Thanks.</P> Wed, 30 Nov 2016 16:51:17 GMT https://community.hpe.com/t5/security-e-series/new-switch/m-p/6922184#M746 newbie010 2016-11-30T16:51:17Z https://community.hpe.com/t5/security-e-series/new-switch/m-p/6922790#M756 <P>If i am getting you right you want to connect another switch that will be in VLAN 64?</P><P>Set the F22 to untagged vlan 64</P><P>&nbsp;</P> Fri, 02 Dec 2016 08:44:28 GMT https://community.hpe.com/t5/security-e-series/new-switch/m-p/6922790#M756 Skribbla 2016-12-02T08:44:28Z