https://community.hpe.com/t5/security-e-series/vrrp-between-two-irf-clusters/m-p/6939491#M883 <P>We would need to see switch configs and the nature of the link between them.</P> Mon, 13 Feb 2017 00:28:21 GMT Vince-Whirlwind 2017-02-13T00:28:21Z https://community.hpe.com/t5/security-e-series/vrrp-between-two-irf-clusters/m-p/6939231#M875 <P><SPAN>Hi All,</SPAN><BR /><SPAN>i'm facing an issue related to a VRRP configuration. Now i have two geographical IRF clusters linked via L2 trunk. On a virtual interface on a primary site i forced VRRP to be master, assigning highest priority 254. The other site is configured with default value 100. I tried to decrease the priority on the master site to 90 and the VRRP state changed from master to standby. The issue is i noticed a very slow connectivity to machines behind that vlan. On the switch there are VRRP log about routing issue.</SPAN><BR /><SPAN>Anyone could help me?</SPAN><BR /><BR /><SPAN>Thanks,</SPAN><BR /><SPAN>Fabio</SPAN></P> Fri, 10 Feb 2017 16:47:51 GMT https://community.hpe.com/t5/security-e-series/vrrp-between-two-irf-clusters/m-p/6939231#M875 Fabio82 2017-02-10T16:47:51Z https://community.hpe.com/t5/security-e-series/vrrp-between-two-irf-clusters/m-p/6939491#M883 <P>We would need to see switch configs and the nature of the link between them.</P> Mon, 13 Feb 2017 00:28:21 GMT https://community.hpe.com/t5/security-e-series/vrrp-between-two-irf-clusters/m-p/6939491#M883 Vince-Whirlwind 2017-02-13T00:28:21Z