Simplivity Nodesapceusage

werner.zeller — Mon, 01 Oct 2018 14:13:26 GMT

Hi, how can I controll the space usage of the Simplivity nodes? The (older) Tool Nodespaceusage can show that. Is that without the tool in the vCenter or OVC command possible?

Thanks!

Re: Simplivity Nodesapceusage

DamianErangey — Tue, 09 Oct 2018 14:25:16 GMT

The following command can now be used to list indvidual node space userage (consumption).

dsv-balance-show --showNodeIP

Please note you will need to be root user to run this command. As of version 3.7.3 you now have the ability to elevate to the root user.

1. Open an ssh session to the management ip address of any OVC within the vmware cluster.

2. Type "sudo su"

3. Type the command "source /var/tmp/build/bin/appsetup"

4. Issue the command dsv-balance-show --showNodeIP

The following post(s) may help https://damianerangey.com/category/how-virtual-machine-data-is-stored-and-managed-within-a-hpe-simplivity-cluster/part-1/

topic Simplivity Nodesapceusage in HPE SimpliVity

Simplivity Nodesapceusage

Re: Simplivity Nodesapceusage