topic Re: There is a problem with Simplivity PlugIn in HPE SimpliVity

There is a problem with Simplivity PlugIn

WilmHosenfeld — Thu, 12 Dec 2019 01:15:58 GMT

Hello

There is a problem with plug-in which I installed with the version 17.25.0 in ESXi 6.7 u3 and 3.7.10.245 OVC.

At first, Everything was working normal. so I wanted to test the Password of SSO and root. and after that, the passwords were synchronized in all node and ovc.

nevertheless, now, I can't see the Information in the Menu :" HPE Simplivity Federation"

How should I resolve that?

There is one cluster with 2 SimpliVity Nodes

Regards,

Wilm

Re: There is a problem with Simplivity PlugIn

DowS — Thu, 12 Dec 2019 06:54:38 GMT

Hi Wilm,

Unfortunately ESXi 6.7 u3 is not listed as being supported in the 3.7.10 Interoperability Guide.
https://support.hpe.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-a00080626en_us&withFrame

Re: There is a problem with Simplivity PlugIn

SimonHorwood — Fri, 13 Dec 2019 12:06:41 GMT

you are using the HTML client as the flash one is no longer supported?

Re: There is a problem with Simplivity PlugIn

OzgurT — Tue, 17 Dec 2019 17:36:52 GMT

Esxi 6.7 U3 not supported yet and will be supported with next release of svt sotware version..As my understaning it was working fine some how.So hot dd you sync pasword on OVCs..Can you see 3 ip address correctly ofor each ovc on vcenter ? Did you restart the vcenter or any serives of vcenter

Re: There is a problem with Simplivity PlugIn

WilmHosenfeld — Thu, 19 Dec 2019 01:27:12 GMT

yes

I'm using the HTML client

Thank you for your answer.

Re: There is a problem with Simplivity PlugIn

WilmHosenfeld — Thu, 19 Dec 2019 01:31:13 GMT

Each OVC has correctly three IP and I already restarted the VCSA and reinstalled Plug in. but the issue was not resolved.

So I should install the ESXi 6.7.u2 or more less than 6.7u3

Thanks

Re: There is a problem with Simplivity PlugIn

DeclanOR — Thu, 19 Dec 2019 09:15:14 GMT

Hi @WilmHosenfeld

First step is to install a supported version of vCenter to ensure compatability with the 3.7.10 software.

Question: Do you also have linked mode vCenters? If so, does each linked mode vCenter manage SimpliVity nodes, or are there vCenters that manage clusters that do not contain SimpliVity nodes also?

Thanks,

DeclanOR

Re: There is a problem with Simplivity PlugIn

Kheiry — Thu, 19 Dec 2019 20:58:49 GMT

Check the browser language, default should be english USA

If using Firefox, delete tha cache and re-check

If the OVC IP addresses are the same, open a console on any OVC, this should refresh IP addresses then re-check plugin

Re: There is a problem with Simplivity PlugIn

Ilkins — Wed, 03 Mar 2021 09:49:20 GMT

Yeah, I've also noticed that. Don't want to be rude or something but seems to me that the problem is in adaptability of this plugin actually. I know what I’m talking about because there is always a thing that can go wrong with those WordPress plugins. I was working with a company on developing a plugin https://wordpress.org/plugins/bookit/, for instance, and it was just hell. Not only that you have to reconfigure the code every single time you want to adjust it, but it’s also about the fact that all your changes are making the project way heavier, and, in the end, you have to tell your customer that it’s a very powerful yet demanding plugin.