topic Re: svtdploy.tgz in HPE SimpliVity

svtdploy.tgz

alicem — Mon, 16 Mar 2020 11:58:35 GMT

Hi.

I am trying to deploy Omnistack 4.0.0 to my Apollo 2600. (ESXi 6.7U3)

However, after step 10 (that is Hypervisor installation and reboot), all of my servers stuck at boot with this error: (and the HPW Simplivity deployment manager throws a timeout error)

I am able to see this error by ctrl+alt+f11. The main console is blank with a blinking cursor at the bottom

======================================================

cpuxx: vib signatures verified. Unrecognized tardisks: [svtdploy.tgz]

======================================================

any suggestions?

Ali Cem

Re: svtdploy.tgz

gustenar — Mon, 16 Mar 2020 14:12:58 GMT

Hello @alicem

Thank you for using HPE SimpliVity forum.

Is this a new node being installed? Is all firmware up to the latest version supported by Software 4.0.0 already installed?

Thanks,

-Gus

Re: svtdploy.tgz

alicem — Mon, 16 Mar 2020 14:31:07 GMT

Hi,

Thanks for the quick response.

This is a brand new installation with 3 new nodes in a new Apollo 2000 Chassis

The firmwares are the latest.

Re: svtdploy.tgz

DaveOb — Fri, 20 Mar 2020 13:31:16 GMT

What MTU is being set in the deployment manager?

verify the md5/sha1 sum of the media used,

Perhaps burn an additional usb with the image using something like rufus.

Does it happen on all nodes?

Has it failed more then once?