topic Re: Deployment crash in HPE SimpliVity

Deployment crash

Patai — Tue, 25 Aug 2020 13:30:10 GMT

Hello all,

My deployment has been stuck at 18% for 8 hours. There are no apparent errors ....
Where could the problem come from?

Re: Deployment crash

gustenar — Wed, 26 Aug 2020 11:12:38 GMT

Thank you for using Simplivity Forum.

Can you open a remote console to that host and see where is at? Check if ESXi has been already installed or if it booted to another device.

Thanks.

Re: Deployment crash

Patai — Wed, 26 Aug 2020 11:57:08 GMT

Hi gustenar

Yes i do factory reset

I'm waiting for it to end

Re: Deployment crash

gustenar — Wed, 26 Aug 2020 12:12:53 GMT

@Patai

Make sure you do a good factory reset on the host first. The host must be on "waiting to be discovered" status and you have to configure an IP address before attempting the redeployment again.