topic Re: Simplivity pre-deployment in HPE SimpliVity

Simplivity pre-deployment

ictisi — Thu, 03 Sep 2020 14:12:24 GMT

Dears all!
We're preparing Simplivity deployment on a single node (version 4.0.1) on a new infrastructure.
To deploy the environment, our supplier asked us 2 tasks for the implementation:

1- Install a Virtual Machine on our current VMware cluster (Separated from the new environment) for the Simplivity Deployment
2- Install a new Vcenter appliance server v6.7 (we already have one vcenter for our cluster, version 6.5) that we'll be migrated into the Simplivity after the initial tasks.

Do you have any idea why would us proceed this way?
I'm scared about deploying a new Vcenter appliance server in our current environment to manage an external infrastructure.

What do you think about ?

Thanks!

Re: Simplivity pre-deployment

ictisi — Thu, 03 Sep 2020 14:15:18 GMT

Please keep in mind that this is our first installation

Thanks!

Re: Simplivity pre-deployment

gustenar — Thu, 03 Sep 2020 15:17:30 GMT

Hello @ictisi

Thank you for using Simplivity Forum.

Preferrably you want to set up your vCenter outside the Simplivity federation so in case something happens to the node you still have management capabilities and access to the vCenter. This is a single node and there is no high availability for the Virtual machines.

Thanks,

gustenar

Re: Simplivity pre-deployment

Elan08 — Thu, 03 Sep 2020 15:19:17 GMT

Hi,

The Virtual Machine is for Installing the Deployment Manager (the tool used to deploy the nodes) and also Arbiter Software ( which acts as a quorum) for the cluster. You can also utilize an existing Windows Server 2016 Machine for the same purpose.

VCenter 6.7 is recommended for SimpliVity Deployment. However vCenter 6.5 is also supported provided the build is compatible with our SimpliVity.

Here is the link for the Interoperability Guide for you to verify your existing vCenter version compatibility with latest version of SimpliVity 4.0.1.

Link: https://psnow.ext.hpe.com/doc/a00095520en_us

Kindly let us know you if have any queries.

Stay safe

Re: Simplivity pre-deployment

JohnHHaines — Thu, 03 Sep 2020 15:25:18 GMT

It really depends how you want to manage it.

There is NO requirement for a separate vCenter for SimpliVity, you can use your existing vCenter if it is going to continue to exist posrt-deployment.

That said, a vCenter only interacts with the servers that have been imported/installed in it, so having two would not be an issue - it's just not required (and it's not free).

You do need someplace to run the Arbiter, if you plan to use one (it is REQUIRED for a two node cluster, or stretch cluster, not required for a Single Node, or a cluster of 3 or more nodes).

You also need someplace to run the Deployment Manager, but that coudl just as easily be your workstation. It's easier for the deployment team to use a new machine for both of these (less worries about conflicts), but it's not required.