topic Simplivity Expansion nodes in HPE SimpliVity

Simplivity Expansion nodes

alexandre_cs — Tue, 01 Jun 2021 20:51:31 GMT

Hi Folks,

Hope everything is doind good!

I have a question and hope some of you could help me.

Imagine a deployment of 2 simplivity clusters (Main site/ secundary site), with 2 nodes (1 processor each) in the main site and 1 node (2 Processors) in the secundary site, both clusters managed by the same vCenter.

In this scenario, if I want to expand my resources adding more nodes to the main site, that node could be a 2 processors node?

Thanks a lot.

Re: Simplivity Expansion nodes

Mohsina_4 — Thu, 03 Jun 2021 14:55:48 GMT

Hi @alexandre_cs

Thank you for posting your query. As I see, you are looking for assistance on Simplivity Expansion nodes.

This is to inform you that our engineers are looking into this and we will reply to you shortly.

Regards,

Mohsina

Re: Simplivity Expansion nodes

US_SimpliVity — Thu, 03 Jun 2021 15:13:45 GMT

From the HPE SimpliVIty Interoperability Guide (Page 30):

Mixing of configurations is allowed with certain caveats: • Mixing of processor generations requires configuring the cluster to support migration between processor generations. For VMware clusters this means enabling Enhanced VMotion Compatibility (EVC) to the lowest common processor before adding newer processors. Virtual machines on this cluster will not be able to utilize processor features above this level. • Mixing different drive configurations within a cluster results in unbalanced I/O performance. • All HPE SimpliVity hosts in the cluster should be a similar size class (all small, all medium, all large, etc.). For the best experience and performance, HPE recommends that all members of a cluster be of similar configuration.

There are other considerations in the guide for adding additional nodes to a cluster. See the section: HPE SimpliVity Host Interoperability Within Clusters

https://support.hpe.com/hpesc/public/docDisplay?docId=a00099036en_us

Although you CAN add a host with more processing resource to the same cluster, it is recommended that systems in the same cluster be of similar configuration.

I am an HPE Employee.