topic Re: Backup to remote site in HPE SimpliVity

Backup to remote site-SimpliVity

angtl91 — Mon, 07 Mar 2022 12:23:13 GMT

I have a scenario whereby 2 production SimpliVIty nodes and 1 DR SimpliVity node. We are planning to direct connect 2 production SimpliVity node (for storage & federation) and 1G management network. When I configured the remote backup to DR site, will the backup traffic route through management network or Federation network?

Re: Backup to remote site

B0ris — Fri, 25 Feb 2022 10:44:13 GMT

Simplivity Backup goes via Simplivity Federation network.

Re: Backup to remote site

angtl91 — Fri, 25 Feb 2022 10:53:36 GMT

So is that means the remote backup will not works since we are using direct connect for the storage & federation network on production nodes?

Re: Backup to remote site

B0ris — Fri, 25 Feb 2022 11:16:31 GMT

Not that i'm aware of. Direct connect is only supported with 2-node cluster. If you wish to add 3rd node, you must reconfigure (connect existing 2 nodes to network switch) and extend yout network to secondary site.

Maybe you should open a support ticket to HPE, just to be sure.

Query: Backup to remote site

support_s — Fri, 25 Feb 2022 11:41:47 GMT

System recommended content:

1. Backups in Remote site Appear as Degraded

2. SimpliVity Video - How to configure remote backups – Network Requirments

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.