topic Re: Method to change arbiter in HPE SimpliVity

Method to change arbiter

J-Philippe — Thu, 13 Sep 2018 08:16:13 GMT

Hello, I'm looking for the appropriate way to change the aribter IP on a Simplivity Strecthed cluster.

I have the command line (svt-arbiter-address-set --address) but my concern is more about the good way to do it in order to avoid issues.

Does the arbiter must be in the same IP range of the OVC or can it be different as long as routing is done ?

Regards.

Jean-Philippe

Re: Method to change arbiter

DowS — Tue, 18 Sep 2018 06:06:05 GMT

Hi Jean-Philippe,

Using svt-arbiter-address-set --address is perfectly acceptable as long as you are simply changing IP on the Arbiter.

If changing the instance of Arbiter then the dsv-arbiter-instance-set --address would be required to update the GUID.

Version's Pre 3.7.4 will require support assistance to perform this action.

3.7.4 onwards can be done by elevating to root using the following steps:

sudo su
source /var/tmp/build/bin/appsetup

The same IP range is not necessary, routing is sufficient. As long as the Arbiter and OVC can connect over

22122 UDP/TCP.

Regards
Simon

Re: Method to change arbiter

Stefano_Colombo — Mon, 18 Feb 2019 14:15:04 GMT

Hi ,

I need to reinstall the arbiter on a server which has the same IP of the old arbiter server

When trying to use the svt-arbiter-address-set command I got the following error

How can I fix it ?

administrator@vsphere@omnicube-ip70-64:~$ svt-arbiter-address-set --address 192.168.10.1
..ERROR [222]: The Arbiter Address specified matches the current arbiter address and the intention w                              as to change the IP address.
    Additional Information:
        ArbiterAddressChange

Re: Method to change arbiter

DowS — Tue, 19 Feb 2019 04:59:15 GMT

Hi Stefano,

As you are not changing the IP of the Arbiter then you do not need the svt-arbiter-address-set command.

As you are changing the instance of Arbiter then the dsv-arbiter-instance-set --address is required to update the GUID.

Version's Pre 3.7.4 will require support assistance to perform this action. and you will need to log a support case.

If you are using version 3.7.4 onwards it can be done by elevating to root using the following steps and running the command:

sudo su
source /var/tmp/build/bin/appsetup
dsv-arbiter-instance-set --address 192.168.10.1

Run svt-federation-show afterwards to confirm the Arbiter shows as connected and federation is healthy.

Re: Method to change arbiter

Stefano_Colombo — Tue, 19 Feb 2019 07:36:16 GMT

Hello
I’ve copied the simplivity folder from the old server to the new one and that worked

Re: Method to change arbiter

J-Philippe — Wed, 06 Mar 2019 10:02:44 GMT

Hello Simon, back with another question about arbiter and to be sure to fully understand the "instance" term.

Current Arbiter is installed on VM "A" with IP "1"

If changing for a new Arbiter on VM "B" with IP "2"

Does I'm changing the "instance" of the arbiter and need to use dsv-arbiter-instance-set --address or the svt-arbiter-address-set --address is enough to upload the cluster ?

Thanks for your help

Re: Method to change arbiter

Stefano_Colombo — Wed, 06 Mar 2019 10:13:15 GMT

In my direct experience you're changing instance , tha'ts why I copied the configuration files from "VM A" to "VM B" .

This way I didn't change instance but only IP

HTH

Re: Method to change arbiter

J-Philippe — Wed, 06 Mar 2019 10:43:56 GMT

Hi Stefano, thanks for your feedback. Does it required to execute the command on each OVC of the cluster or if I upload the instance on 1 OVC that's OK ?

I'm not able to find information about that. even in last 3.7.7 Cli guide the only command talking about the arbiter is the :

svt-arbiter-address-set --address arbiter_IP_address --

Re: Method to change arbiter

Stefano_Colombo — Wed, 06 Mar 2019 11:07:24 GMT

Copying the arbiter software installation folder to the new VM required to perform on one OVC only the command to change the arbiter IP , since the instance didn't change

svt-arbiter-address-set --address arbiter_IP_address --

Re: Method to change arbiter

Henry A.C. Jansen — Fri, 10 Feb 2023 12:30:30 GMT

Thank you Stefano,

Your comment saved my day... Thanks again.