topic Query: HPE Simplivity Rremote Cluster in HPE SimpliVity

HPE Simplivity Rremote Cluster

AlperSelimgil — Mon, 29 Aug 2022 04:33:31 GMT

Hi, we have 2 simplivity system. Site A has a 2 nodes. Site B has a 3 nodes. we want to replicate vms all sides.

how can i add remote cluster to local for backup/replicate vm? ( both sides )

Query: HPE Simplivity Rremote Cluster

support_s — Fri, 26 Aug 2022 09:55:51 GMT

System recommended content:

1. Advisory: HPE SimpliVity Systems - Both Encrypted and Non-Encrypted HPE SimpliVity Systems Can be Deployed to the Same Cluster Without Receiving a Warning Message

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: Query: HPE Simplivity Rremote Cluster

AlperSelimgil — Fri, 26 Aug 2022 10:01:22 GMT

Hi,

i dont want to merge cluster in our current structure

we only want to replicate the VMs from site A to B, andt Vms from site B to A

Thank you.

Re: HPE Simplivity Rremote Cluster

Mahesh202 — Fri, 26 Aug 2022 18:06:15 GMT

Hi AlperSelimgil

Hope you are doing well.!!

Assuming that the two clusters are in a single Federation, it is all about the backup policy.
Add a rule in the policy to perform a remote backup and select the other cluster as the target.
Once the policy is updated, it will add remote backups as part of the standard activity of the policy.

Hope this helps.!!

Regards
Mahesh.

Re: HPE Simplivity Rremote Cluster

AlperSelimgil — Fri, 02 Sep 2022 11:01:39 GMT

@Mahesh202

Hi,

thank you for your support.

How can i join clusters one federation? i cannot see clusters federation when i write at omnistack svt-federation.show

Re: HPE Simplivity Rremote Cluster

Mahesh202 — Fri, 02 Sep 2022 15:23:02 GMT

Hi AlperSelimgil

The best practice to join nodes from diff clusters is to redeploy them.

Please find the below steps which will help you in deploying the SimpliVity nodes.

1. If you are deploying the node in an existing cluster. Then the existing SimpliVity nodes must be healthy.
2. Check the model of the SimpliVity node if it can be deployed in an existing cluster because if the SimpliVity nodes you are trying to deploy are of different models then you may not be able to deploy them in the same cluster. You may have to create a new cluster and deploy it. Please refer to Page No. 17 (HPE OmniStack Host Interoperability Within and Across Clusters) in the below interoperability guide link:
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00038559en_us
3. Ensure that the factory reset image is not corrupted
4. Boot the server to Intelligent Provisioning and select Smart Storage Administrator
5. Select the rear RAID controller mostly E208i
6. Click on "Configure".
7. Click on "Set Bootable Volume"
8. Ensure that the correct primary boot volume is selected
9. Save and restart the server
9. Ensure that the date and time in iLO and in the BIOS are set to UTC(Greenwich Meridian Time)
10. Ensure the BIOS settings are set correctly. Please check the below documents link:
SimpliVity DL380 Gen10:
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=sf000046208en_us

SimpliVity DL380 Gen9:
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=sf000044502en_us
11. Ensure all the network ports are opened. Please refer Page No. 23 to 26 (Ports required for HPE OmniStack hosts) in the below document link:
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00080603en_us
12. Ensure that the windows firewall and anti-virus are turned off on the windows machine where you are running the Deployment Manager
13. Please read all the information/instructions provided in the below document before performing the deployment:
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00080603en_us

Hope this helps.!!

Regards
Mahesh