topic Re: SimpliVity - Deployment Failed in HPE SimpliVity

SimpliVity - Deployment Failed

masonmoesch — Mon, 13 Feb 2023 04:38:56 GMT

Hi all,

I'm trying to re-deploy DL380 Gen9 SimpliVity Nodes. I've removed the front array VDisks on these nodes and back array. I've re-created the back array in a raid 1 as documentation suggests. When going through deployment of 4.1.0u1, validation passes, but it fails at step 8 with the error: "Unable to copy the virtual controller to the datastore. - Conversion failed"

I figure I'm missing something obvious here, has anyone run in to this before or have any troubleshooting suggestions?

Thanks!

-m

Re: SimpliVity - Deployment Failed

Mahesh202 — Fri, 10 Feb 2023 12:35:34 GMT

Hi masonmoesch

I understand that you are having an issue when deploying HPE SimpliVity Node.
I request you to have a look at the below video which talks about HPE SimpliVity Node deployment with a detailed step-by-step procedure.

https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00030091en_us

and here's the link to Prerequisites for Deploying an HPE SimpliVity Node
https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00030093en_us

Hope this helps.!!

Regards
Mahesh