topic Re: Omnistack Gateway update in HPE SimpliVity

Omnistack Gateway update

jep74 — Fri, 26 May 2023 04:21:54 GMT

Hello,

Our customer has a cluste of 2 SimpliVity Node. His networking has changes and we need to update the gateway on Management Interfaces (ESX and OVC).

Does exist an How To ?

Do i have to stop svtfs to operate this change ?

Thanks for your feedback

JEP

Re: Omnistack Gateway update

gustenar — Thu, 25 May 2023 19:27:24 GMT

Hello @jep74

There are procedures available to make the change of the Gateway, it most likely require restarting services in the OmniStack controller, so doing it during a maintenance window is preferred. You may want to open a case with the support group for guidance.

Re: Omnistack Gateway update

Steven Clementi — Sun, 18 Jun 2023 18:13:10 GMT

I just recently ran through the process of having to change the mgmt interface IP and gateway info. The process is extensive and not well documented with current versions of Omnistack. Your best course of action is to open a support case with HPE Support if you are covered.

What version of Omnistack is running?

The only document I found online that explainded the process was outdated and had bad context and syntax with regards to the commands and process needed to follow since i was written for pre 4.0.0 versions (maybe even pre 3.8.0)