https://community.hpe.com/t5/hpe-simplivity/redeploying-node-3-7-4/m-p/7045950#M521 <P>It is worth deleting any existing virtual drives from the previous install on the Front drives these will get recreated during the deployment.DO NOT DELETE the boot device 2 mirrored drives. on the E208i-p</P> Sun, 12 May 2019 11:42:41 GMT DaveOb 2019-05-12T11:42:41Z https://community.hpe.com/t5/hpe-simplivity/redeploying-node-3-7-4/m-p/7045867#M518 <P>Hi, we have to redeploy a node with 3.7.4. We get an error Model type (HPE Simplivity 380 Series 4000) of the selected HPE OmniStack host is not supported.</P><P>&nbsp;</P><P>What can we do?</P><P>Best regards</P><P>werner</P> Sat, 11 May 2019 08:11:32 GMT https://community.hpe.com/t5/hpe-simplivity/redeploying-node-3-7-4/m-p/7045867#M518 werner.zeller 2019-05-11T08:11:32Z https://community.hpe.com/t5/hpe-simplivity/redeploying-node-3-7-4/m-p/7045950#M521 <P>It is worth deleting any existing virtual drives from the previous install on the Front drives these will get recreated during the deployment.DO NOT DELETE the boot device 2 mirrored drives. on the E208i-p</P> Sun, 12 May 2019 11:42:41 GMT https://community.hpe.com/t5/hpe-simplivity/redeploying-node-3-7-4/m-p/7045950#M521 DaveOb 2019-05-12T11:42:41Z https://community.hpe.com/t5/hpe-simplivity/redeploying-node-3-7-4/m-p/7046302#M530 <P>You need to check the version of the deployment manager. I had this issue when i was deploying a 3.7.7 node. I had the 3.7.5 version of the deployment manager loaded.&nbsp;</P> Tue, 14 May 2019 17:35:13 GMT https://community.hpe.com/t5/hpe-simplivity/redeploying-node-3-7-4/m-p/7046302#M530 Palonge 2019-05-14T17:35:13Z