topic Re: Simplivty 3.7.4 fourth node installing in HPE SimpliVity

Simplivty 3.7.4 fourth node installing

sampiyonts — Tue, 02 Jul 2019 16:20:01 GMT

Hello,

When we try to add 4. simplivity node to our cluster, we take error

2019-07-01 15:35:45,842Z ERROR OmniStack-10.1.150.14 [c.s.d.o.Orchestrator] error(DeployLogger.java:98) - step 11 of 30 (35.93%) - Failed to configure management network - Could not find management network switch vSwitch1

Re: Simplivty 3.7.4 fourth node installing

KGman — Wed, 03 Jul 2019 11:16:20 GMT

Hi @sampiyonts,

Usually when we see this type of message it has to do with the default network settings being changed or the non-standard vSphere port-groups being configured. Have you been deploying these four nodes in succession or is this a 4th node being added to an existing cluster.

It would probably be best if you open a support ticket to track and troubleshoot this deployment issue further to come to a quicker turn-around time.

Re: Simplivty 3.7.4 fourth node installing

tpaulat — Sun, 07 Jul 2019 11:58:59 GMT

Hello,

did you remove vSwich1 after deployment of the previous nodes and consolidated everything on vSwitch0?

In this case please just create a vSwitch1 on the other nodes (it can be empty) and try again to deploy. Sounds like deployment installer is looking for vSwitch1 of the previous deployments and cannot find it.

Re: Simplivty 3.7.4 fourth node installing

sampiyonts — Sun, 07 Jul 2019 12:21:20 GMT

Hello,

I removed vswitch0 after deployment the previous switch

And consolide all nodes with vswitch1

Also when installing node4

Created new empty vswitch0 the other nodes but still failed again