https://community.hpe.com/t5/comware-based/resetear-switch-hp/m-p/6884767#M8062 <P>Tu duda es resuelta: el JC103B es <A href="http://h20565.www2.hpe.com/portal/site/hpsc/public/psi/home/?sp4ts.oid=4177501" target="_blank">eso</A>, un HPE FlexNetwork 5800 Switch.</P><P>El <A href="http://www.hp.com/rnd/pdfs/datasheets/ProCurve_Switch_1800_Series.pdf" target="_blank">HP ProCurve 1800</A> es un equipo totalmente diferente. Los equipos no son comparables.</P><P>If you really have the JC103B then that Switch is a Comware based Switch and it is substantially different from an <A href="http://www.hp.com/rnd/pdfs/datasheets/ProCurve_Switch_1800_Series.pdf" target="_blank">HP ProCurve 1800</A>, which is ProVision based.</P><P>So you should read the right manuals (see the link above) to find out what to do to "reset" or manage it correctly.</P> Tue, 02 Aug 2016 23:06:51 GMT parnassus 2016-08-02T23:06:51Z https://community.hpe.com/t5/comware-based/resetear-switch-hp/m-p/6884752#M8061 <P>Hola buena tarde, soy nuevo en el mundo de redes, simplmente quisiera saber la manera de resetear de fábrica un switch HP 5800 JC103B,he revisado algunos manuales para series 1800 y comentan que se debe desconectar el cable de alimentaciób, despues conectar con un cable de red los puesrtos 1 y 2, encender nuevamente el equipo y dejar el cable de red durante 40segundos. Mi duda es aber si eso funciona para el modleo de Switch que tengo, Gracias</P> Tue, 02 Aug 2016 21:20:47 GMT https://community.hpe.com/t5/comware-based/resetear-switch-hp/m-p/6884752#M8061 Fer1 2016-08-02T21:20:47Z https://community.hpe.com/t5/comware-based/resetear-switch-hp/m-p/6884767#M8062 <P>Tu duda es resuelta: el JC103B es <A href="http://h20565.www2.hpe.com/portal/site/hpsc/public/psi/home/?sp4ts.oid=4177501" target="_blank">eso</A>, un HPE FlexNetwork 5800 Switch.</P><P>El <A href="http://www.hp.com/rnd/pdfs/datasheets/ProCurve_Switch_1800_Series.pdf" target="_blank">HP ProCurve 1800</A> es un equipo totalmente diferente. Los equipos no son comparables.</P><P>If you really have the JC103B then that Switch is a Comware based Switch and it is substantially different from an <A href="http://www.hp.com/rnd/pdfs/datasheets/ProCurve_Switch_1800_Series.pdf" target="_blank">HP ProCurve 1800</A>, which is ProVision based.</P><P>So you should read the right manuals (see the link above) to find out what to do to "reset" or manage it correctly.</P> Tue, 02 Aug 2016 23:06:51 GMT https://community.hpe.com/t5/comware-based/resetear-switch-hp/m-p/6884767#M8062 parnassus 2016-08-02T23:06:51Z https://community.hpe.com/t5/comware-based/resetear-switch-hp/m-p/6884862#M8063 <P>Forgot to provide a possible answer: probably <A href="https://community.hpe.com/t5/Comware-Based/HP-A5800-JC100A-Factory-Reset-Newbie/m-p/6880205" target="_blank">this post</A> (Factory Default) will help you (in any case look for the same command and procedure inside the HPE FlexNetwork 5800 documentation, try the Fundamental Configuration Guide)</P> Wed, 03 Aug 2016 08:39:52 GMT https://community.hpe.com/t5/comware-based/resetear-switch-hp/m-p/6884862#M8063 parnassus 2016-08-03T08:39:52Z