topic Re: Aruba 2540 how to enable SSL? in HPE Aruba Networking & ProVision-based

Aruba 2540 how to enable SSL?

hyvokar — Tue, 18 Sep 2018 10:51:52 GMT

Hi,

Trying to enable SSL on my switch.
If I create a self signed certificate, all my browsers refuse to connect to switch over https.
Chrome gives me NET::ERR_CERT_INVALID, IE gives me This site isn’t secure

Error Code: DLG_FLAGS_INVALID_CA

I have a working PKI, so I could use that, but for some reason "Create CSR" on web management is grayed out. Any ideas?

Re: Aruba 2540 how to enable SSL?

Masghar — Tue, 18 Sep 2018 11:11:46 GMT

did you received any error while runninng

1- crypto pki identity-profile

2- crypto pki enroll-self-signed

you share error while you may have logs from switch?

thanks,

Re: Aruba 2540 how to enable SSL?

hyvokar — Tue, 18 Sep 2018 11:25:02 GMT

Hi,

Thank you for your reply.
Didn't run those commands on cli, only used the web management.

Web management gave me no error.
If there's a tutorial somewhere how to create a CSR, that could be useful.

Re: Aruba 2540 how to enable SSL?

HP-Browniee — Tue, 18 Sep 2018 11:29:41 GMT

Hello

On following link you can find the commands to enable SSL on you aruba switch in CLI

Re: Aruba 2540 how to enable SSL?

hyvokar — Wed, 19 Sep 2018 06:40:44 GMT

Hi,

Thank you for your reply and link.

As I said in my opening post, I have already created a self signed certificate, and I'm running into problems with that. I need to know how to create a CSR and enroll a certifacate from my PKI.