topic Re: Problems with Web Interface. in HPE Aruba Networking & ProVision-based

Problems with Web Interface.

Gordon Cook — Wed, 14 Mar 2012 18:07:46 GMT

When I try to use the Web Interface to access the VLAN Mgmt using SSL I get a blank page. It works fine if I turn off the SSL security.

I am documenting how to perform some routine steps on managing the switch and the web interface is much easier to document than the CLI.

Anyone else having this issue.

I have two E5412zl switches running K.15.06.0008, ROM K.15.19

I have the same issue using Firefox or IE and on multiple computers.

I also have an issue where when I click on a link in the web interface I the system changes from HTTPS to HTTP and the page does not display. Again this happens in both IE and firefox and on multiple computers.

Thanks Gord.

Re: Problems with Web Interface.

MrNilsson — Mon, 30 Apr 2012 07:14:12 GMT

Hi Gordon!

I have the same problem, we are just in the beginning of an migration from old nortel switches to HP, Last week I did a hardened Template from the zl5406 switches (enabled HTTPS/SCP) and after enabled https I cannot list the VLAN in the web interface... just keeps loading, same problem with SNMP settings...

E5406zl K.15.06.0008, ROM K.15.19

Mr Nilsson

Re: Problems with Web Interface.

CiTox_HD — Tue, 01 May 2012 17:50:52 GMT

Hi Guys,

I have the same problem too. I'm glad to see I'm not the only one.

Re: Problems with Web Interface.

jefflj — Fri, 11 May 2012 22:16:12 GMT

This appears to be a bug in the SW. I would contact HP spuport and file a report.

Re: Problems with Web Interface.

jefflj — Fri, 11 May 2012 22:37:32 GMT

I've done some digging, this is a known issue and is being actively investigated by HPN

Re: Problems with Web Interface.

Chrisd131313 — Wed, 01 Aug 2012 12:21:09 GMT

Just to add my 2pence worth, I am getting the same issue with the web gui on a 2620 ra.15.08.0009 using https.