topic Re: Synergy vs NSX-T - Compatible and works !! in HPE Synergy

Synergy vs NSX-T

MichalSterba — Wed, 18 Sep 2019 19:07:57 GMT

Hello all,

I would like to ask you if somebody has experience and/or design guide for NSX-T running on Synergy. I have only found technical whitepaper which is focused on NSX-V, so it is not usable.

I have customer which decided to migrate from NSX-V to NSX-T and there is limitation on Synergy Virtual Connect side :

NSX-T needs (in customer's design) 4 independent uplinks bringing same VLAN (GENEVE VLAN in this case), so it is not possible because obvious reason where VirtualConnect allows one VLAN to be delivered only on one NetworkSet / Compute module uplink pair.

As first recommendation a tunneled mode came to my mind, but is it "best practise" to do it in such way? I do not really know - do we have other choices?

Thanks in advance

Michal

Re: Synergy vs NSX-T

jsm6 — Sat, 21 Sep 2019 15:19:15 GMT

Hi Michal,

I did dearched and couldnt find any technical paper for NST-V with Synergy. as you mentioned other thn NSX-V

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00063331en_us&docLocale=en_US

But seems this is supported as part of VCF.

https://blogs.vmware.com/cloud-foundation/2018/12/13/announcing-vmware-cloud-foundation-3-5-general-availability/

If you have Vmware support with HPE (or) with vendor itself, please log a support case for them to validate.

Thanks.

Re: Synergy vs NSX-T

DeepakAshwath — Thu, 24 Oct 2019 07:26:05 GMT

Hello Michal,

We were deploying NSX-T VCF Workload domain on HPE-Synergy and faced a similar problem with respect to the Geneve VLAN, however we did not face the issue in Proliant-DL and the NSX-T along with PKS deployment was successful.

Below is the screenshot where we are unable to establish the Geneve Tunnel on HPE SYnergy- ICMs

Thanks,

Deepak.A

Re: Synergy vs NSX-T - Compatible and works !!

DeepakAshwath — Wed, 06 Nov 2019 08:26:50 GMT

Hi All,

In response to the previous message, NSX-T on HPE Synergy can be deployed.

As part of Solution Engineering team (ESP) we were able to deploy NSX-T as a VMware Cloud Foundation Workload Domain along with the PKS solution.

We were able to establish the geneve vtep between ESXi and NSX-edge and the error I have posted was due to a wrong gateway/router on the ToR switch that lead to the failure, however it is resolved and NSX-T deployed successfully on HPE Synergy.

All the latest HPE Synergy adapters supports VXLAN/GENEVE/NVGRE, please check the specs (revised Oct-7 2019) in the below link

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00043968enw

PS - We will publishing a RA, Video very shortly (by end of Nov-2019), will be sharing the content here if required.

Thanks,

Deepak.A