https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7071821#M229 <P>I have buried in the back of my head a memory that if you do something as simple as rename the profile, it will trigger the OneView to audit the SAN Paths and update Zoning as needed.</P><P>But I can't find where I read that.</P> Thu, 05 Dec 2019 00:37:45 GMT DanRobinson 2019-12-05T00:37:45Z https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7064443#M182 <P>Hello.</P><P>I have one 3PAR with two nodes connect to direct attach my VC of Sinergy</P><P>I have two news Hbas for my 3PAR and I will change de path connect to new hba and delete old.</P><P>I view the Interconect VC the WWN correct my new Paths, but the virtual volumes present in the profile server show the old Paths.</P><P>I reaply the profile (shutdown server) and work it with the new Path.</P><P>How I Can give the servers new path 3PAR without reaply profiles?</P><P>I can't shutdown all Sinergy Servers.</P><P>Thanks!</P> Thu, 26 Sep 2019 10:11:58 GMT https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7064443#M182 Elfegume 2019-09-26T10:11:58Z https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7064675#M186 <P>Hi,</P><P><SPAN>I have two news Hbas for my 3PAR and I will change de path connect to new hba and delete old. - Was it done from profile?How did you changed the path/added new connections to server online?</SPAN></P><P>You may try a profile refresh,else you need to have downtime to re-apply profile.</P> Sat, 28 Sep 2019 08:06:58 GMT https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7064675#M186 jsm6 2019-09-28T08:06:58Z https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7064769#M187 <P><SPAN>So is it impossible to apply new paths without loss of service?</SPAN></P> Mon, 30 Sep 2019 07:32:29 GMT https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7064769#M187 Elfegume 2019-09-30T07:32:29Z https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7065366#M188 <P><SPAN>How did you changed the path/added new connections to server online?Was it done by editing profile?</SPAN></P> Fri, 04 Oct 2019 12:06:50 GMT https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7065366#M188 jsm6 2019-10-04T12:06:50Z https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7065999#M189 <P>You might need to re-apply profile and thats the only option i could think off to update the new paths.</P> Thu, 10 Oct 2019 16:27:19 GMT https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7065999#M189 jsm6 2019-10-10T16:27:19Z https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7067268#M197 <P>I just tested modifying SAN paths online in OneView 4.10.03 and 4.20.02 and both of them let me modify the SAN connections without taking down the server.&nbsp; However, I was using switched fabric topology and not direct attach.&nbsp;&nbsp;</P> Tue, 22 Oct 2019 19:30:01 GMT https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7067268#M197 DanCernese 2019-10-22T19:30:01Z https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7071821#M229 <P>I have buried in the back of my head a memory that if you do something as simple as rename the profile, it will trigger the OneView to audit the SAN Paths and update Zoning as needed.</P><P>But I can't find where I read that.</P> Thu, 05 Dec 2019 00:37:45 GMT https://community.hpe.com/t5/hpe-synergy/new-path-3par-with-direct-attach-flat-my-sinergy/m-p/7071821#M229 DanRobinson 2019-12-05T00:37:45Z