topic Query: How to Remove License Interconnect Module Hpe Synergy in HPE Synergy

How to Remove License Interconnect Module Hpe Synergy

Yosep1 — Wed, 30 Apr 2025 00:08:21 GMT

Hi All,

I have a problem inserting 2 ICM licenses into one frame, the two licenses should be for 2 frames, so I wan to remove for second license.

Thanks.

Regards,

Yosep Purnama

Query: How to Remove License Interconnect Module Hpe Synergy

support_s — Tue, 22 Apr 2025 08:45:41 GMT

System recommended content:

1. HPE OneView 3.0 Release Notes for HPE Synergy

2. HPE Synergy Grow Best Practices

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: How to Remove License Interconnect Module Hpe Synergy

support_s — Fri, 25 Apr 2025 06:55:35 GMT

Greetings!
Please refer to the userguide below:
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00001378en_us&page=GUID-D7147C7F-2016-0901-066E-000000001765.html

https://support.hpe.com/hpesc/public/docDisplay?docId=sd00005729en_us&page=GUID-D7147C7F-2016-0901-066E-000000001773.html

Re: How to Remove License Interconnect Module Hpe Synergy

shiva_jr — Fri, 25 Apr 2025 07:39:54 GMT

Hi @Yosep1 ,
I am not sure, but if I recall, just check is it possible by following steps-

a. First, check to which ICM, the second license is assigned.
b. Remove logical interconnect groups if any, and remove Interconnect from enclosure.
c. In Appliance - Licensing, identify the 2nd license and make it deallocate or removed.

Regards,
Shiva_jr

Query: How to Remove License Interconnect Module Hpe Synergy

support_s — Mon, 28 Apr 2025 11:11:48 GMT

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".