Gen12 Compute module into a synergy 12000 Frame

bouwman22 — Mon, 02 Jun 2025 03:56:06 GMT

I'm looking for any guidance/documentation for a 480 Gen12 support in a synergy 12000 frame. Any upgrades that need to be done? Composer? FLM? Can you mix Gen11 and Gen12 modules?

Thanks!

Re: Gen12 Compute module into a synergy 12000 Frame

DanCernese — Fri, 30 May 2025 18:20:37 GMT

Mixing Synergy Gen11 and Gen12 in the same frames, if you already are properly configured for Gen11, it may not be a lot of change:

For Gen11

You must have at least HPE OneView 8.7 on the HPE Synergy Composer2
You must be using an SSP that is still within the 18-month current support lifecycle (that carries the required FLM version too)

For Gen12

Requires HPE OneView 10.0 that was released end-May
Requires SSP 2025.05.01 that was also released end-May
Note that Gen12 no longer offers a CNA and therefore FC storage requires a dedicated FC fabric
If the frame already has Gen11, then it will already have the required VC 100Gb modules and may have the 32Gb FC modules
Always run the frame configuration through the Power Advisor!
3000/3400W PSUs can be hot swapped with 2650s if they only need a small bump in power.
2650/3000/3400 which are all 1x PSU per slot however cannot be Hot Swapped to the Dual PS Adapter and the 2x2200W design.
The 1x family and the 2x family do not work together, so you need to take a frame outage if you want to cross that line.
SY480 Gen12 will requires iLO7 1.13.01 and FLM 5.02.00 that will be in the new SSP.
There is nothing new in the fans / power space for Gen12 over Gen11.
Be cautious when ordering Gen12 with all the new local storage options, the factory may configure your Mezz 2 / fabric 2 for the internal drive storage.
Any storage fabric already in the frame may need to move
First configure a Gen12 by choosing the drive cage required and then make a plan if this impacts the frame and existing computes

Query: Gen12 Compute module into a synergy 12000 Frame

support_s — Tue, 03 Jun 2025 04:55:41 GMT

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

topic Gen12 Compute module into a synergy 12000 Frame in HPE Synergy

Gen12 Compute module into a synergy 12000 Frame

Re: Gen12 Compute module into a synergy 12000 Frame

Query: Gen12 Compute module into a synergy 12000 Frame