topic Re: HPE Synergy Fluid Pools in HPE Synergy

HPE Synergy Fluid Pools

HPEEPH — Sat, 13 Jun 2020 09:18:54 GMT

Can someone explain in basic terms how exactly compute fluid pooling works.

Can compute resources be shared across nodes? If I install a ESX on Synergy Node 1 and Node 2, and Node 1 ends up being very CPU hungry, and Node 2 is memory hungry - are the remaining resources available across the 2 nodes as a shared pool?

What’s the benefit if I can just move VMs around to balance out resource utilisation?

Re: HPE Synergy Fluid Pools

AkilDevaraj — Mon, 15 Jun 2020 04:07:44 GMT

Hello

Compute fluid pooling is managing the resourcing available in the single compute and not combining two compute nodes to share resource when and as a workload increases.

But you can create multiple profile templates so that you can utilize the templates for the same compute as and when required or when there is a workload change but cannot combile resources from two different compute nodes.

Reference document https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04815139.pdf Page 6

Storage and fabric pooling can be performed for better optimization.

Thank you

Re: HPE Synergy Fluid Pools

megwynne — Tue, 16 Jun 2020 16:06:36 GMT

For "how-to" information, you can use the Synergy online Help that is accessible through the HPE OneView interface. Also, there is helpful information at the Synergy information library here: https://www.hpe.com/info/synergy-docs