https://community.hpe.com/t5/hpe-synergy/unable-to-open-compute-module-consoles-on-two-blades-using/m-p/7151179#M836 <P>After moving our one of our Synergy installation to a new network, we are unable to start console for two from OneView.&nbsp; &nbsp;We see a message saying "Connected" and no further output.&nbsp; &nbsp;We have physically reset both of the compute modules and that did not help.&nbsp; &nbsp;We need to get into the console in order change the IP address of the iLO.&nbsp; &nbsp;What can we do to poke the blades to open up the console?</P><P>Dave</P> Thu, 07 Oct 2021 03:53:43 GMT Dave_Thacker 2021-10-07T03:53:43Z https://community.hpe.com/t5/hpe-synergy/unable-to-open-compute-module-consoles-on-two-blades-using/m-p/7151179#M836 <P>After moving our one of our Synergy installation to a new network, we are unable to start console for two from OneView.&nbsp; &nbsp;We see a message saying "Connected" and no further output.&nbsp; &nbsp;We have physically reset both of the compute modules and that did not help.&nbsp; &nbsp;We need to get into the console in order change the IP address of the iLO.&nbsp; &nbsp;What can we do to poke the blades to open up the console?</P><P>Dave</P> Thu, 07 Oct 2021 03:53:43 GMT https://community.hpe.com/t5/hpe-synergy/unable-to-open-compute-module-consoles-on-two-blades-using/m-p/7151179#M836 Dave_Thacker 2021-10-07T03:53:43Z https://community.hpe.com/t5/hpe-synergy/unable-to-open-compute-module-consoles-on-two-blades-using/m-p/7151180#M837 <P>In Synergy, from OneView hardware there is an IPv4 address, IPv6 address, and DNS name with SSO.&nbsp; You should be able to get there through one of those links without ever opening up a console.</P> Wed, 06 Oct 2021 17:45:17 GMT https://community.hpe.com/t5/hpe-synergy/unable-to-open-compute-module-consoles-on-two-blades-using/m-p/7151180#M837 DanCernese 2021-10-06T17:45:17Z