https://community.hpe.com/t5/comware-wireless-unified-series/configuration-of-ap-templates-and-binding-service-profiles-to/m-p/6751281#M640 <P>In the HP 850 WebGUI one can group access points and apply in batch changes to these access point groups (e.g. change Client Keep-Alive interval) or apply a wireless service profile to an access group.</P><P>&nbsp;</P><P>WSM does not seem to have this access point group notion.&nbsp; Looks like one has to configure changes to access points, indivually, per access points.&nbsp; Correct ?</P><P>&nbsp;</P><P>Same for applying a service profile to a group of access points or radio's.&nbsp; Can't be done in group.&nbsp; (while radio policies can be applied in group through the radio policies in batch option)</P> Sun, 31 May 2015 16:49:06 GMT tdeserranno 2015-05-31T16:49:06Z https://community.hpe.com/t5/comware-wireless-unified-series/configuration-of-ap-templates-and-binding-service-profiles-to/m-p/6751281#M640 <P>In the HP 850 WebGUI one can group access points and apply in batch changes to these access point groups (e.g. change Client Keep-Alive interval) or apply a wireless service profile to an access group.</P><P>&nbsp;</P><P>WSM does not seem to have this access point group notion.&nbsp; Looks like one has to configure changes to access points, indivually, per access points.&nbsp; Correct ?</P><P>&nbsp;</P><P>Same for applying a service profile to a group of access points or radio's.&nbsp; Can't be done in group.&nbsp; (while radio policies can be applied in group through the radio policies in batch option)</P> Sun, 31 May 2015 16:49:06 GMT https://community.hpe.com/t5/comware-wireless-unified-series/configuration-of-ap-templates-and-binding-service-profiles-to/m-p/6751281#M640 tdeserranno 2015-05-31T16:49:06Z