https://community.hpe.com/t5/m-and-msm-series/getting-wireless-clients-ap-association-from-cli/m-p/5705393#M1176 <P>Hi guys, I have a MSM760 v5.5 and looking for a way to get the Clients - AP association from the CLI.</P><P>&nbsp;</P><P>If I go to enable and then do a "show controlled-aps wireless clients" I get these columns:</P><P>&nbsp;</P><P>Radio, MAC addres, IP address, SSID, Duration, Signal, Noise, SNR<BR /><BR /></P><P>And that's excellent, but, in addition to those columns I need the AP name.</P><P>&nbsp;</P><P>Do you know a way to get this info in the CLI?</P><P>&nbsp;</P><P>Thanks in advance!</P> Thu, 28 Jun 2012 18:30:03 GMT Fidencio 2012-06-28T18:30:03Z https://community.hpe.com/t5/m-and-msm-series/getting-wireless-clients-ap-association-from-cli/m-p/5705393#M1176 <P>Hi guys, I have a MSM760 v5.5 and looking for a way to get the Clients - AP association from the CLI.</P><P>&nbsp;</P><P>If I go to enable and then do a "show controlled-aps wireless clients" I get these columns:</P><P>&nbsp;</P><P>Radio, MAC addres, IP address, SSID, Duration, Signal, Noise, SNR<BR /><BR /></P><P>And that's excellent, but, in addition to those columns I need the AP name.</P><P>&nbsp;</P><P>Do you know a way to get this info in the CLI?</P><P>&nbsp;</P><P>Thanks in advance!</P> Thu, 28 Jun 2012 18:30:03 GMT https://community.hpe.com/t5/m-and-msm-series/getting-wireless-clients-ap-association-from-cli/m-p/5705393#M1176 Fidencio 2012-06-28T18:30:03Z