E-MSM460 access point Monitoring

ITdeptDPT — Mon, 24 Sep 2012 14:23:48 GMT

Hello,

We have four E-MSM460 access points set up around the building connected to a router.

It all works fine except we have some of the AP's fall over occasionally.

I am trying to work out whether or not the disruption and slow speeds are to do with the number of connections or if they are to do with the amount of network traffic.

Is there a way to monitor network traffic by IP and/or MAC address?

Thanks!

Re: E-MSM460 access point Monitoring

Richard Litchfield — Fri, 28 Sep 2012 07:31:07 GMT

Each client in the MSM system has a log associated with the AP it is associated with.

Select Controller | VSCs | Wireless Clients, then click on the MAC address.

topic E-MSM460 access point Monitoring in M and MSM Series

E-MSM460 access point Monitoring

Re: E-MSM460 access point Monitoring