topic Html login page bypassed in M and MSM Series

Html login page bypassed

Ali_Moghrabi — Tue, 13 Nov 2012 23:04:26 GMT

Hello,

I'm trying to set up a guest/corporate networks using an msm760 controller and 10 aps.

i haven't got it up and running yet because i ran into certain issues.

When i connect to the guest or the corporate network, the user gets access to the internet without the login page being shown, even though i check it on the VSC config page.

the guest is using a local html login profile

and corporate is using active directory.

both are getting bypassed.

any help would be appreciated.

Thank you.

Re: Html login page bypassed

JesseR — Wed, 14 Nov 2012 17:14:16 GMT

Do you have the client data tunnel enabled on the guest VSC?

Need help with MSM deployments?

http://h30499.www3.hp.com/t5/MSM-Series/MSM-Deployment-Scenario-How-To-Guide/td-p/5717081

Re: Html login page bypassed

Ali_Moghrabi — Wed, 14 Nov 2012 17:58:12 GMT

Hello,

Thank you for the reply

No i have it disabled. Should i enable it?

ill take a look a that post. thx

Re: Html login page bypassed

Ali_Moghrabi — Wed, 14 Nov 2012 21:40:32 GMT

ok i found the problem but not the solution.

i set up the dhcp server on the controller in a way so tht the controller is the default gw and dns server. so it worked and the html login page appeared. but the next time i checked the settings, they had changed. for some reason the pc is using the external dhcp server used for the rest of the network and not the one i set up on the controller.

so bcz of that the user has access to the internet without going through the login page.

in conclusion: the external dhcp server is overriding the config of the local controller based dhcp server

any ideas?

Re: Html login page bypassed

Ali_Moghrabi — Thu, 15 Nov 2012 19:32:08 GMT

bump

Re: Html login page bypassed

Ali_Moghrabi — Tue, 20 Nov 2012 14:07:13 GMT

now the login page appears, but after a successful login, the users don't have internet access..

anyone has any idea?

Re: Html login page bypassed

gglater — Wed, 05 Dec 2012 21:13:57 GMT

@Ali_Moghrabi wrote:
now the login page appears, but after a successful login, the users don't have internet access..

anyone has any idea?

What is the support case number for this issue? I'll check on the status...