Configuration issues with HP MSM720 with Radius authentication and guest network

AVANCESupport — Thu, 13 Dec 2012 15:49:43 GMT

Hello,

I hope somebody can help us. With an installation we have issues we cannot resolve and we are in need of some assistance.

We have installed a HP MSM720 controller with MSM466 AP's and the problem is that we have a corporate wireless network with Radius authentication (NPS) and we have 2 separate guest networks with WPA Authentication. Corporate network works fines but we can't get the two guestnetworks working over a seperate Internet connection.

Hope somebody can help us with this one.

Re: Configuration issues with HP MSM720 with Radius authentication and guest network

david-rivas — Thu, 20 Dec 2012 12:21:29 GMT

Hello,

I understand you have configured 3 VSC's. 1 for corporate network with Radius authentication, and other 2 VSC's with WPA that does not work.

We need more information about your problem and configuration. Your clients got IP address from DHCP? The VSC's with WPA has Access control enabled?

Regards,

topic Configuration issues with HP MSM720 with Radius authentication and guest network in M and MSM Series

Configuration issues with HP MSM720 with Radius authentication and guest network

Re: Configuration issues with HP MSM720 with Radius authentication and guest network