https://community.hpe.com/t5/m-and-msm-series/msm-710-controller-issue/m-p/5924041#M1688 hi, we have currently deployed a hp wireless solution of one of our client in srilanka. with 5nos HP MSM 410 access point with HP MSM 710 access controller. but there is a issue. every time the controller restarts Access Points are again stuck on the "Waiting for Acceptance" mode.We have to reset the controller and re-configure it to avoid this problem every time. what seems to be the issue can you pls give me a solution for this? Mon, 07 Jan 2013 19:48:33 GMT farizh 2013-01-07T19:48:33Z https://community.hpe.com/t5/m-and-msm-series/msm-710-controller-issue/m-p/5924041#M1688 hi, we have currently deployed a hp wireless solution of one of our client in srilanka. with 5nos HP MSM 410 access point with HP MSM 710 access controller. but there is a issue. every time the controller restarts Access Points are again stuck on the "Waiting for Acceptance" mode.We have to reset the controller and re-configure it to avoid this problem every time. what seems to be the issue can you pls give me a solution for this? Mon, 07 Jan 2013 19:48:33 GMT https://community.hpe.com/t5/m-and-msm-series/msm-710-controller-issue/m-p/5924041#M1688 farizh 2013-01-07T19:48:33Z https://community.hpe.com/t5/m-and-msm-series/msm-710-controller-issue/m-p/5946413#M1735 <P>are you running any VLAN on the wired/wireless network and is the controller&nbsp;installed on&nbsp;the same site as the AP's or is it located elsewhere eg datacentre/cloud?</P><P>do you use the LAN or internet port (port1 or port2) to discover AP's?</P><P>have you provisioned the AP's in any way?</P> Mon, 28 Jan 2013 16:32:53 GMT https://community.hpe.com/t5/m-and-msm-series/msm-710-controller-issue/m-p/5946413#M1735 Colin_Airpass 2013-01-28T16:32:53Z