https://community.hpe.com/t5/m-and-msm-series/using-a-msm760-across-the-wan/m-p/5959519#M1769 <P>Yes and yes. Put the branch APs in its own AP group with the appropriate VSC binding applied.</P> Sun, 10 Feb 2013 17:52:15 GMT Fredrik Lönnman 2013-02-10T17:52:15Z https://community.hpe.com/t5/m-and-msm-series/using-a-msm760-across-the-wan/m-p/5959517#M1768 <P>Hi</P><P>&nbsp;</P><P>I have a client with an existing MSM760 in use, is it possible to use the MSM to control another branch's AP's over their WAN connection? I know the subnet for the branch is reachable over the WAN. Can I then have the new Branch's SSID only display on their AP's and not the existing main branch's AP's?</P><P>&nbsp;</P><P>&nbsp;</P> Sun, 10 Feb 2013 17:32:50 GMT https://community.hpe.com/t5/m-and-msm-series/using-a-msm760-across-the-wan/m-p/5959517#M1768 RenatoV 2013-02-10T17:32:50Z https://community.hpe.com/t5/m-and-msm-series/using-a-msm760-across-the-wan/m-p/5959519#M1769 <P>Yes and yes. Put the branch APs in its own AP group with the appropriate VSC binding applied.</P> Sun, 10 Feb 2013 17:52:15 GMT https://community.hpe.com/t5/m-and-msm-series/using-a-msm760-across-the-wan/m-p/5959519#M1769 Fredrik Lönnman 2013-02-10T17:52:15Z