https://community.hpe.com/t5/m-and-msm-series/suspicious-state-and-wrong-ip-for-aps/m-p/6153589#M2087 u can set the AP to use static IP.. its easy to maintain..<BR />but u need to make sure the correct untagged port configured at switch Wed, 31 Jul 2013 04:23:43 GMT oweng 2013-07-31T04:23:43Z https://community.hpe.com/t5/m-and-msm-series/suspicious-state-and-wrong-ip-for-aps/m-p/6150521#M2076 <P>Hi, all.</P><P>&nbsp;</P><P>We have a MSM760 controller with a mixture of 422 and 460 APs for a total of 37. Lately I have noticed that various of our access points are becoming suspicious. I have looked at the diag info displayed on the controller and that hasn't helped. The only change we have recently made was adding a new SSID to the network and added about 6 new APs (none of which have gone into the suspicious state). I have also noticed (but I think it has been doing it since day 1) that the APs themselves get a management IP from any VLAN that is tagged or untagged at the AP interface on the switch. There are a total of 3 SSIDs on out network all with different VLANS and a management VLAN for the AP that is untagged for the AP. We are running firmware version 5.7.2.0-12736.</P><P>&nbsp;</P><P>Does anyone have any suggestions to either of the problems? I don't necessarily think they are both related.</P><P>&nbsp;</P><P>Daniel</P><P>&nbsp;</P> Mon, 29 Jul 2013 04:44:07 GMT https://community.hpe.com/t5/m-and-msm-series/suspicious-state-and-wrong-ip-for-aps/m-p/6150521#M2076 danielhum 2013-07-29T04:44:07Z https://community.hpe.com/t5/m-and-msm-series/suspicious-state-and-wrong-ip-for-aps/m-p/6153589#M2087 u can set the AP to use static IP.. its easy to maintain..<BR />but u need to make sure the correct untagged port configured at switch Wed, 31 Jul 2013 04:23:43 GMT https://community.hpe.com/t5/m-and-msm-series/suspicious-state-and-wrong-ip-for-aps/m-p/6153589#M2087 oweng 2013-07-31T04:23:43Z