topic MSM760 unable to detect AP MSM430 in M and MSM Series

MSM760 unable to detect AP MSM430

Ivan13 — Mon, 04 Nov 2013 04:52:14 GMT

I tried manytimes verify this issue the controller MSM760 is just able to sync up with the AP MSM430.

I had try reset-ted the AP problem still occur and tried with different unit of MSM430AP.

I also tried manually added the AP and still unable to discover the AP , this is abit weird, i am not sure is configuration problem or hardware issue.

Anyone can advise? Below is the screenshot

Re: MSM760 unable to detect AP MSM430

Georgeisaac — Mon, 04 Nov 2013 06:08:49 GMT

Hi,

APs should get IP address first.

Please check DHCP server is enabled on network,

Device dicovery should be enabled on access port . Its on by default

George

newdaywireless.wordpress.com

Re: MSM760 unable to detect AP MSM430

Ivan13 — Mon, 04 Nov 2013 06:30:24 GMT

Attached is the DHCP relay i configured and i already checked the LAN port for apply DHCP relay on it, the LAN port is the port which connected the controller to the network.

Anyhow , it still the same cant detect the AP

Re: MSM760 unable to detect AP MSM430

Arimo — Tue, 05 Nov 2013 15:12:37 GMT

What excatly do your AP LEDs show at this point?

Re: MSM760 unable to detect AP MSM430

MSMenthousiast — Wed, 11 Dec 2013 12:49:55 GMT

Hi

if your DHCP server is directly on your LAN subnet then you dont need to use the dhcp relay option.

Also, if you have access to your AP, an easy way to see if its got an IP is by looking at the LEDs. If the power LED blinks slowly then your AP doesnt have an IP. Once the AP gets an IP, it should toggle Power/Wired/Wireless and back which means its in the discovery process.

Also, make sure the dhcp server is giving IPs in the same scope/subnet as your LAN.

Finally, check that AP Discovery is enabled on your LAN port (Controller -> Management -> Discovery)